Two flat panels measuring 140 cm each give 280 cm of fabric across a 180 cm track. That is 1.56 times the track width. Whether the curtains will meet the way you want depends on where the two leading edges must end.
Mark the meeting point first
For this example, put a pencil mark halfway along a sketch of the track. Each curtain travels 90 cm to the mark. To overlap by 10 cm in total, let each curtain travel another 5 cm. Each side now has to cover 95 cm. We assume no side returns and choose 1.5 times the covered width as our preferred fullness. This is a design choice for the example. If your heading already has fixed pleats, use its specified coverage instead.
Turn the measurements into a pack count
| Item to copy from the listing | Example A | Example B |
|---|---|---|
| Flat, finished width | 140 cm per panel | 150 cm per panel |
| Panels in a pack | Two | One |
| Flat width needed per side | 95 × 1.5 = 142.5 cm | 142.5 cm |
With A, one pack gives one panel on each side. Each falls 2.5 cm short of the preferred flat width. It can still cover 95 cm at a fullness of about 1.47. If you like that look, one pack suffices. If 1.5 is a firm minimum and you want one continuous panel per side, even a second pack of A will not make either panel wider. With B, two single-panel packs give one 150 cm panel per side and a fullness of about 1.58. Check the drop and heading separately before choosing.
For your own window, write down the track span, total overlap, each side’s return, preferred fullness, finished width per panel and panels per pack. For a symmetric pair, add half the span, half the overlap and that side’s return before multiplying by the fullness. If the listing gives only a pair width, confirm what was measured before dividing by two.
Original example inputs · Arithmetic checks for the original examples